The culmination of nearly 40 years of progressive press design and production. Years of comments and suggestions have been incorporated into this new press.
40 S&W Six Pack Pro Kit includes Six pack progressive press, Auto drum powder measure, shell plate, Universal case feed magazine, and Lee breech lock dies (carbide full length sizing die, powder through expanding die, bullet seating die, and instructions with load data). Carbide factory crimp die is sold separately, available as an accessory.
10mm Auto may be reloaded with the 40 S&W Six Pack Pro. To reload 10mm Auto, obtain a #19L shell plate, sold separately. 10mm Auto load data can be found in Modern Reloading or ordered here.
Features:
Six stations allow any brand of die be used -- in line bullet feed dies, powder check dies and such.
Simple and reliable automatic indexing -- just one moving part, replaceable in seconds, no tools required and never requires adjustment.
Stroke and clearance sufficient for largest magnum rifle cases. Uses the same all steel linkage found on our Classic Cast 50 BMG press.
Massive 28.4mm ram glides through 82 mm of solid steel giving the ram over 7300 mm2 of solid support.
Spent primer tube collects dirty, gritty spent primers.
All dies securely fastened in the upper die carrier with Lee Smart Lock bushings. No more turret or tool head to replace or move during use.
Automatic priming system - simple, reliable and safe with any brand or size of primer. Primes at the bottom of stroke so all six stations are available for operations.
Automatic case inserter works with any case. Cases can be manually fed through the convenient loading port. Includes the Lee case feed magazine, works with most hand gun cases and all AR rifle cases.
Easy to set case retainers on every station. No springs, plugs or buttons to loose or tinker with.
Cartridge changeover in seconds, including primer size with no adjustments.
Automatic case ejector reliably whisks away your completed round to the ammo bin. Press includes combination tool rack, bin bracket, along with free ammo bin.
Click here for parts
Click here for mounting plate/drill template
Product information:
| Maximum cartridge overall length | 30/06 3.340" C.O.A.L. |
| Base material | Steel |
| Columns material | Steel |
| Ram | Steel |
| Ram diameter | Over 1" |
| Linkage | Steel |
| Shell plate carrier material | Steel |
| Shell plate carrier cover material | Zamak 5 Zinc |
| Tool head material | Aluminum |
| Die size accepted | 7/8" x 14 |
| Number of die mounting holes | 6 |
| Breech Lock Quick Change bushings | Yes |
| Priming feature | Yes, no primer brand restriction |
| Spent primer collection tube | Yes |
| Country of origin | Proudly made in USA |
WARNING: Handling live primers and spent primers may expose you to lead or other chemicals, which are known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov
WARNING: This product may contain steel alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov. To prevent exposure, do not alter the product by welding, grinding, etc.
